|
TMA250-MP
Electromechanical Actuator
250 Pound Capacity |
|
|
SPB 3405 -
115 VAC (60Hz) with clutch |
| SPB
4405 - 220 VAC (50 Hz) with clutch |
| HSPB 3405
- 115 VAC (60 Hz) High Speed with clutch |
|
| Stroke Lengths |
3, 6, 12,
and 18 inch, 75, 150, 300, 450 mm |
| Motor Protection |
Automatic reset thermal overload in
motor |
| Temperature Range |
-20°F. to 104°F
Ambient -29°C to 40°C |
| Drive |
Double Lead Screw |
| Housing |
Aluminum alloy |
| Standard Mounting |
Double Clevis |
| Cable Entrance |
1/2" NPT |
| Clutch |
Load limiting friction
disc |
| Restraining Torque |
60 in lbs, 6.78 N-m |
| Brake |
Bi-Directional Ball Type |
| 115 VAC motor is
an enclosed, permanent split capacitor induction type. Load /
no-load speeds are approximately equal. The motor is equipped with
a thermal overload device that opens and resets automatically.
Standard motor requires 28-33 mfd
capacitor supplied by either the customer, or Duff-Norton at extra cost,
for loads up to 250 pounds. High speed motors require a 64-72 mfd
capacitor, also available from Duff-Norton. A capacitor box is
available on AC models only. |
|
220 VAC motor is
totally enclosed, permanent split capacitor induction type.
Load/no-load speeds are approximately equal. Equipped with thermal
overload device that opens and resets automatically. Standard
motor requires 10 mfd
440VAC, 60/50Hz metalized polypropylene capacitor supplied by
Duff-Norton. |
|
Additional
Notes |
- Some actuator surface temperatures may reach
230°F at or near maximum allowable duty cycle.
- The thermal overload resets in 10
minutes.
- All ratings are normal and based on
the actuator being broken in for approximately 2500 inches of travel.
|
|
Performance
Characteristics |
|
