|
EMD130
- 2000
Electromechanical Actuator 2000 Pound Capacity |
|
|
SPD 6420
12 VDC with clutch |
| Stroke Lengths |
3, 6, 12, 18, and 24 inch, 75, 150, 300, 450,
610 mm |
| Motor Protection |
Thermal
protection provided by fuse |
| Temperature Range |
-20°F. to 104°F
Ambient -29°C to 40°C |
| Drive |
Ball Screw and Nut |
| Housing |
Aluminum alloy |
| Standard Mounting |
Double Clevis |
| Restraining Torque |
130 in lbs, 21.47 N-m |
| Brake |
Automatic Set Spring Type |
| Clutch |
Load Limiting
Friction Disc |
| Cable Entrance |
1/2" NPT |
| 12 VDC motor is
a totally enclosed, weather resistant, permanent magnet type.
Magnets act as secondary brake for added safety. This type of
motor is smaller, cooler running, more efficient and has higher duty
cycles than series-wound motors. Lower current draw provides for
longer battery life. The motor is also equipped with a thermal
overload device that opens and resets automatically. The rotation
is reversible by reversing the two color coded leads, and torque is the
same in either direction. |
|
Controls
are also available for these actuator models as follows: |
- Control Package PDC-1R:SPD 6420
- Control Package BAC -2 for 7420 Series
|
|
Additional
Notes |
- Some actuator surface temperatures may reach
230°F during operation at or near maximum duty cycle. All
ratings are nominal and based on the actuator being broken-in for
approximately 2500 inches of travel.
|
|
Performance
Characteristics |
|
