| Aero-Motive Reels, Balancers |
| Coffing Hoists Hoists, Hoist Repair |
| CM Hoists Chain Hoists, Wire Rope, Ratchet Levers, Trolley |
| Conductix Power and Data Transfer Systems |
Demag
Overhead Cranes
Hoists and Winches Gearmotors
Ergonomic Systems |
| Duff-Norton Mechanical Actuators, Rotary Unions, Electromechanical Actuators |
| Equipto Storage Systems |
| Hamilton Caster Casters, Hand Trucks |
Harrington Hoists
Chain & Wire Hoists |
| Joyce/Dayton Jacks, Actuators |
| Lyon Tool Storage, Locker Units |
| Perfecting Coupling |
| Ram-Pac Hydraulic Tools |
| Simple Green Degreasing Systems |
Stanley Bostitch
Pneumatic Tools, Fasteners |
| In-Plant Offices, Mezzanines |
 |
| |
|
| Duff-Norton
electromechanical actuators are the best packaged solution for your linear actuation
needs. With capacities ranging from 100 to 2,000 pounds, no one offers a greater selection
of both AC and DC models. This extensive line of models is designed to meet the most
challenging applications. Benefiting from the latest in advanced design techniques,
manufacturing methods, and over three decades of electromechanical product experience, Duff-Norton
packaged electromechanical actuators last longer and run smoother with little maintenance
and no headaches. If you have a linear actuation application, All-Lift
Systems, together with Duff-Norton, has the packaged solution
for you. |
Electromechanical Actuator Units |
|
|
TMD100
|
- 100 lb (45 kg) capacity
- Input voltages: 12 VDC or 24 VDC
- Standard Stroke Lengths:
2 to 12 inches (51 to 300 mm)
- Adjustable limit switches
- Optional potentiometer feedback
|
|
- 250 lb (113 kg) capacity
- Input voltages: 12 VDC or 24 VDC
- Standard Stroke Lengths: 2
to 12 inches (51 to 3000 mm)
- Adjustable limit switches
- Optional potentiometer feedback
|
|
TMD250
|
|
TMA250-MP
TMA500-MP
|
- 250 and 500 lb. (133 and 227
kg) capacities
- Input Voltages: 115 VAC/60 Hz, 220
VAC/50
Hz
- Standard stroke lengths: 3
to 18 inches (75 to 450 mm)
- Lifting speeds up to 85 in/min(215
cm/min) at rated load
- Overload and overtravel
limiting clutch
|
|
- 250 and 500 lb. (133 and 227
kg) capacities
- Input Voltages: 115 VAC/60 Hz, 220
VAC/50
Hz
- Standard stroke lengths: 3
to 18 inches (75 to 450 mm)
- Lifting speeds up to 85
in/min (215 cm/min) at rated load
- Easily adjustable,
end-of-travel limit switches
|
|
TMAL250-MP
TMAL500-MP
|
|
TMD250-MP
TMD500-MP
|
- 250 and 500 lb. (133 and 227
kg) capacities
- Input Voltages: 12 VDC and
24 VDC
- Standard stroke lengths: 3
to 18 inches (75 to 450 mm)
- Lifting speeds up to 140
in/min(3.56 m/min) at rated load
- Friction disk slip clutch
prevents harmful overload and overtravel
|
|
- 250 and 500 lb. (133 and 227
kg) capacities
- Input Voltages: 12 VDC and
24 VDC
- Standard stroke lengths: 3
to 18 inches (75 to 450 mm)
- Lifting speeds up to 150
in/min(3.81 m/min) at rated load
- Dual adjustable limit
switches
|
|
TMDL250-MP
TMDL500-MP
|
TMDL750
|
- 750 lb. (340 kg) capacity
- Input Voltages: 115 VAC/60
Hz and 220 VAC/50 Hz
- Standard stroke lengths: 4,
8, 12, and 18 inches (100, 200, 300, 450 mm)
- Lifting speeds up to 15.25
in/min at rated capacity
- Independent, adjustable limit
switches
- ACM screw, Belt driven
|
- 1000 lb. (455 kg) capacity
- Input Voltages of 115 VAC/60 Hz, 220
VAC/50
Hz
- Standard stroke lengths from
3 to 24 inches (75 to 610 mm)
- Lifting speeds up to 53
in/min (1.3 m/min) at rated load
- Adjustable limit switches
and optional potentiometers for discrete travel endpoints
|
TMAL1000-HD
|
TMD1500-SP
TMDL2000-SP
|
- 1500 and 2000 lb. (680 and
910 kg) capacity
- 12 VDC input voltage
- Stroke lengths from 3 to 24 inches
(75 to 610 mm)
- Double lead machine screw
and highly efficient ball screw models
- Lifting speeds up to 27
in/min (685 m/min) at rated load
- Built-in slip clutch
prevents damaging loads and excessive travel
|
- 1500 and 2000 lb. (680 and
910 kg) capacity
- Input Voltages: 115 VAC/60 Hz and
220 VAC/50 Hz
- Stroke lengths from 3 to 24 inches
(75 to 610 mm)
- Double lead machine screw
and highly efficient ball screw models
- Lifting speeds up to 50
in/min (1.3 m/min) at rated capacity
- Fully adjustable limit
switches at both ends of travel
|
TMAL1500-SP
TMAL2000-SP
|
TMDL1500-SP
|
- 1500 lb. (680 kg) capacity
- 12 VDC input voltages
- Stroke lengths from 3 to 24 inches
(75 to 610 mm)
- Double lead machine screw models
- Lifting speeds up to 27 in/min (685
m/min) at rated load
- Dual adjustable limit switches
|
- Rated loads to 2,000 lbs.
- Lift Speeds to 170 inches per minute (varies with load and hp/rpm
of motor)
- Standard travel up to 24 inches.
- Optional motors, limit switches and position indicating transducer
available
- Choice of 5:1 or 20:1 worm gear ratios.
- Housing base bolt pattern will accept standard hydraulic and
pneumatic accessories.
|
M2400 & BM2400 |
EMD130 - 2000 |
- Rated loads to 2,000 lbs.
- 12 VDC input voltages
- Stroke lengths from 3 to 24 inches
(75 to 610 mm)
- Double Clevis standard mounting
- Aluminum alloy housing
|
|
|
